Menu
Your Cart
M²Synth now shipping worldwide 

All Products

This module, the VCO 101 is a fully featured oscillator which we consider to be your main VCO. Where space is limited, it pairs up well with its mini-version, the VCO 103. This combination gives the fat two oscillator sound plus offer synchronisation between the oscillators for those rich harmonic s..
£180.00
Ex Tax:£150.00
The voltage controlled 24dB/octave 4-pole low pass filter is the default filter for your synth. The 110 is a full size 2U wide module with a 3-channel signal mixer making it ideal for mixing the waveforms from up to three VCOs for that fat sound. Filter 116 is similar but without the mixer allowing ..
£192.00
Ex Tax:£160.00
The MIDI 2 CV Converter features in all of our systems including the starter System 10. With the 140 module, you can plug in your MIDI keyboard or your PC via a USB to MIDI converter. The 140 also has an auxiliary output that can be used for pitch bend, modulation wheel or key velocity.Features ..
£180.00
Ex Tax:£150.00
The Chord VCO 102 is similar to the VCO 101 and VCO 103 except that this VCO contains 4 individual VCOs that are controlled in such a way as to produce preset chords. As with any analogue VCO, they are not precise unlike their digital equivalents but this is often viewed as an advantage. Tuning..
£432.00
Ex Tax:£360.00
The VCO 101 is a fully featured oscillator which we consider to be your main VCO. Where space is limited, it pairs up well with this mini-version, the VCO 103. This combination gives the fat two oscillator sound plus offer synchronisation between the oscillators for those rich harmonic sounds.Featur..
£138.00
Ex Tax:£115.00
The voltage controlled low frequency oscillator (VCLFO) is most often used as a modulation source. Use it to create vibrato or tremolo effects, controlling the pulse width of VCOs, for panning sound across the stereo spectrum and so on. Any analogue synth should have at least one VCLFO but often hav..
£132.00
Ex Tax:£110.00
This module, the Voice 108 contains all of the essential elements of an analogue synth in a single 'voice' module. It uses toggle switches for patching with additional jack sockets for integrating into your modular synth.Voice 108 Functions: VCO, LP VCF, VCA, ADSR, LFO, Noise generator, Mi..
£444.00
Ex Tax:£370.00
The voltage controlled 24dB/octave 4-pole low pass filter is the default filter for your synth. The 110 is a full size 2U wide module with a 3-channel signal mixer making it ideal for mixing the waveforms from up to three VCOs for that fat sound. Filter 116 is similar but without the mixer allowing ..
£144.00
Ex Tax:£120.00
The voltage controlled 24dB/octave 4-pole high pass filter passes the higher harmonics whilst blocking the lower frequencies hi-hats anyone?Features 1 Volt / Octave cut-off frequency CV)Cut-off modulation input with potentiometer attenuator (FM)Resonance potentiometer control with an external C..
£126.00
Ex Tax:£105.00
The voltage controlled 4-pole quad filter with low pass, high pass, band pass and an all pass filter commonly referred to as a state variable filter. Unlike many state variable filters, the 112 maintains a 24dB / Octave response and allows for individual CV control of each filter type. The HP, BP an..
£324.00
Ex Tax:£270.00
The voltage controlled 12dB/octave 2-pole band pass filter passes a narrow band of frequencies while attenuating the frequencies above and below the cut-off frequency. Features 1 Volt / Octave cut-off frequency CV)Cut-off modulation input with potentiometer attenuator (FM)Resonance potenti..
£126.00
Ex Tax:£105.00
The voltage controlled 12dB/octave 2-pole band reject (notch) filter passes all frequencies except for a narrow band around the cut-off frequency. Features 1 Volt / Octave cut-off frequency CV)Cut-off modulation input with potentiometer attenuator (FM)Resonance potentiometer control adjust..
£126.00
Ex Tax:£105.00
Showing 1 to 12 of 48 (4 Pages)